Rongge

Battery-backup converter with one NiCd cell Notebook computers and added carriageable accessories generally use a advancement array to absorb anamnesis accommodation during advancement of the capital battery. Such "bridge batteries" usually abide of bristles or six series-connected NiCd bread cells. They're accepted to accumulate the arrangement animate for about 5 minutes—plenty of time to bandy batteries. The ambit in Figure 1 reduces size, weight, and amount by application one NiCd corpuscle instead of bristles or six. A Saft VB4E 40-mAhr NiCd bread corpuscle has abundant accommodation to accumulate a archetypal anthology computer in append approach for about 10 minutes. All apparatus (excluding the bread cell) absorb beneath than 1/2 in.2 of pc-board area, and the amount accumulation from beneath beef advice pay for the added circuitry. When it's operational, the capital array provides ability to the system's dc/dc converters. The LT1304 addition advocate con...

This circuit is used for controlling the volume of output  and then entered the mixer, but this circuit not only as the volume setting. This circuit also serves to reduce noise , and increase the gain  at the signal coming from the output. See schematic , PCB line ,and construction below   Master mixer circuit Looked Down Looked Up

This is a unique flasher circuit employing a single driver transistor that takes its flash-rate from a flashing LED. The flasher within the photo is 3mm. An ordinary LED won't work. The flash rate can not be altered by the brightness of the high-bright white LED will be adjusted by altering the 1k resistor across the 100u electrolytic to 4k7 or 10k. The 1k resistor discharges the 100u in order that when the transistor activates, the charging current into the 100u illuminates the white LED. If a 10k discharge resistor is used, the 100u isn't absolutely discharged and therefore the LED doesn't flash as bright. All the components within the photo are within the same places as within the circuit diagram to make it simple to envision how the components are connected. The circuit uses a flashing LED to flash a super-bright 20,000mcd white LED